rtx 3090 undervolt mining

Under the test, with my previous undervolt setting, that used 100% (stock) on the powerslider, my GPU clock dropped from the 1815MHz to 1750-ish MHz, because maximum power was hit (the 100%). Lose all my peripherals and displays but the computer is still on, once sent to warranty they say the issue didnt occur, Time Spy ST: 98.8% 330-340W Stable frequency, Port Royal ST: 99.6% 340-350W Stable frequency, Pure RT: 34.5 FPS 360-370W Stable-ish frequency (some drops to 1785MHz), Time Spy ST: 99.4% 350-370W Stable frequency, Pure RT: 34.3 FPS 370-375W Unstable frequency (1740-1815MHz). The setting is Rockstable. I have a Strix 3090 and it is just running on +100 on core and thus clocking in game aroud 2100Mhz If you look at recent generations the card with the highest OC'd cores / memory is rarely the one with the highest fps. Increase the frequency of the 800mv slider through the slider found in step 4, in 25mv increments, to +105MHz, but never exceeding the frequency found in step 3. Started 55 minutes ago Start now Nvidia RTX 3090 Overclock msOS Windows Power limit 335 W Core clock -300 MHz Memory clock +1700 MHz Locked core clock 1165 MHz Fan speed 100% Popular client T-Rex or they got sent a better binned card by nvidia for reviews. - Less heat - Less fan RPM due to less heat, therefore less noise if that was a issue. If i go lower like 1850 for 0.8 will I lose a lot of performances? All of these are practical tests in a closed case with pleasant but appropriate regulation of the case fans in an insulated case. Posted in Graphics Cards, By Gonna keep sneaking it down a little more. Thought I'd head back to this thread and mention this awesome test/benchmark. Do I need to test with max ray tracing on and off for stability? G eForce RTX 3090 Family - NVIDIA My 3090 can't do that, and it's a shame, because Optimum Tech reports his 3090 draws 71 watt less at 1800MHz using 806mV and that'spretty good. sasume It made overclocking a piece of cake without the inherent base activity. click on a point and shift+drag the curve down so the highest part is below the frequency you want to set as max for your undervolt I ran the heaven benchmark through a few times giving the card a run to warm up before recording hardware information. Also my 3090 is on water and is around 30c at 0.7v, if you are on air is not going to hit it. Press question mark to learn the rest of the keyboard shortcuts. limit. Like I said (I'm not 100% on this) but anything over around 0.83 volts and the card will try and use the full 350 watts, on the FE anyway. Free Shipping for Loyal Forum Members - CLICK HERE, https://www.youtube.com/watch?v=TOkAcr01ZTw, Officially least sunny location -Ronskistats. The Neo Forza brand is a relatively new player in the DRAM memory modules and flash memory products that established in 2018. They feature dedicated 2nd gen RT Cores and 3rd gen Tensor Cores, streaming multiprocessors, and a staggering 24 GB of G6X memory to deliver high-quality performance for gamers and creators. Nvidia RTX 3060 Overclock. Card ate 480w in an instant lol. That can't be real. I wonder why people like to talk crap GPU-Z is a lightweight utility designed to give you all information about your video card and GPU. Yes for sure. When it came up, it immediately gave an advantage to Nvidia because the memory didn't have to suffer the full brunt unless the gpu needed it a hundred percent. I seriously hope it's true. 3080 (sorry) but currently happily chugs along at 1830mhz@806mv all day every day. I am going to try changing my MSI 3090 voltage to .75mV and see where that leads me. Now I own a 3090 TUF OC that is able to hold 1800MHz at 812mV, quite a nice result if I may say so: I've tried stretching it to 1860MHz, but it starts warming up more and becoming not so stable (frequency wise), I also am very concerned by any temperature increase since the VRAM chips on those cards run very hot: Nice tip about this Pure RT benching tool. Started 1 minute ago How can I UNDERVOLT a GPU (RTX 3070) below 700mv? ZOTAC GeForce RTX 3090 Trinity Review | TechPowerUp Temps could be better and other then bumping Memory, have left pretty much all at stock other then custom fan curve. :oops: yeah, haha, but it's not working properly. I agree, too many people talk crap without knowing the facts. Mine PC case is hot box Nzxt h510 without mesh; at least 10deg.celzius up due to closed front panel, so yeah 0.8v is way to go. And Time spy score is 19450 vs stock 19900 . It is on tpu, and it works fine on strix only problem is that one hdmi port is not working. This is rock stable and knocks about 70W power and 5C temp off stock settings, as well as giving me about 75MHz increase in core GPU speed, so a win all round. GDDR6X temperatures for that card peaked at 100C. 1TbSamsung Evo M.2/ 2TbSamsung QVO/ 1TbSamsung Evo780/ 120gbKingston Now, LG 65UN85006LA 65" Smart 4K Ultra HD HDR LED TV with Google Assistant & Amazon Alexa, Thermaltake CoreX71 Limited Edition Etched Tempered Glass Door, [url=https://valid.x86.fr/gtle1y][img]https://valid.x86.fr/cache/banner/gtle1y-6.png[/img][/url], Gigabyte Z690 Aorus Master / HP 83A3 (U3E1), Noctua NH-U12A 2 fans + Thermal Grizzly Kryonaut Extreme + 5 case fans / Fan, 32GB DDR5 Corsair Dominator Platinum RGB 6000MHz CL36 / 8GB DDR4 HyperX CL13, MSI RTX 2070 Super Gaming X Trio / Intel HD620, Samsung 980 Pro 1TB + 970 Evo 500GB + 850 Pro 512GB + 860 Evo 1TB x2 / Samsung 256GB M.2 SSD, 23.8" Dell S2417DG 165Hz G-Sync 1440p / 14" 1080p IPS Glossy, Be quiet! silicon varies, so it might be possible optimum tech simply had more luck with their card. On 6/3/2021 at 3:40 PM, BetteBalterZen said: Upgrading from my very outdated gaming laptop. I noticed the extra power connector on the strix version and decided to get that instead. Games crashes after a couple of minutes. Certain. So I increased it to the 137% in Afterburner and that kept GPU clock on 1815MHz but total board power increased from 334 watts to 380-ish watts. Other mags like HardwareLuxx and Computerbase have already tested this. Glad it mirrors my initial testing, I never played any titles with RT though to notice the power would differ. I've had to go with 1900 @ 850 with this CPU. . You will not achieve this by lowering the power limit or only with very bad values. I've only really "undervolted" my card. 4070 Ti running much slower than expected ? I just started doing this also ichill 3090x3 gets so bloody loud temps hit 74c and that's with fps locked @ 85fps @ 3440x1440 i dropped it -200 and set it 1755mhz and it very quiet temps 56-64c and get same fps. First time I. Temps with fan ramped up usually get into mid 60's but haven't seen anything in the 70's yet, but it's winter here in Cali. 1 Create an account to follow your favorite communities and start taking part in conversations. You may be able to hit 2000MHz using only 0.7mV while mining. Still trying to find optimal settings for my X suprim, so far I am most happy with 725mv / 1350mhz, + 500 memory. But isnt the Kingpin vBIOS like hidden from the public? Could anyone suggest some in game stress tests to use, with ray tracing please? I'll keep it running in the background(windowed) doing loops with the highest possible graphics settings + the highest possible custom resolution. 24deg. Aha, so you haven't tested 2000MHz at 0.7mV in games or stress tests? I'd like to compare with my results. LTT bilibili channel hits a million subs. I was just pleased that I was getting higher FPS than stock, and better temps to be honest. Like i say i think ive missed my chance to get a card out of this batch due to changing my order. What I and I'm sure many noticed is that it is all. Bonesareawesome Happy for you. I've played it on both 3070 FE and now 3090 FE - The game is a beast, I only get around 40FPS average, your card is just working very hard. Started 8 minutes ago I choose first to set the voltage to 825 mV. Posted in New Builds and Planning, By Neo Forza Faye DDR4-4600MHz 32GB (2x16GB). Started 1 minute ago Undervolt your RTX 3090 for more FPS! - RTX 3000 Full Guide Oh and also;the maximum VRAM temp I've seen from HWiNFO is 96c, so I guess your FTW3 cools the VRAM a tad better? I managed 1905/856. Ive tried everything I can and you mentioned, and not had any issues (touch wood). Can we maybe ask to stick to one way to post it? Started 42 minutes ago Does MSI gaming trio has better memory cooling? I'm kinda blown away If the test drops below the 97.5% in framerate stability, the test will stop (fail). The reason I cant run 2010 on 900mv very long. Optimum Tech 737K subscribers Subscribe 11K 545K views 2 years ago Check prices on Amazon below Nvidia RTX 3090:. Does it matter where you start from, like how much you bring the slider down before selecting your mV/freq? Mining software This GPU is supported Use minerstat and start mining with your Nvidia RTX 3090. The heaviest settings possible Also remember that just because we could undervolt our cards to a certain setting does not mean your card will work the same. I set to 0.7v then card will run at 0.7v regardless any software. I think most of us are pretty familiar with the concept of overclocking. StickyPC We previously reviewed the company's SSD, the Neo Forza eSports NFP075 and today we will take a look at its high performance Faye DDR4-4600 2x16GB dual channel kit RAM. 3080 Ti vs 3090: A Detailed Comparison | The WiredShopper Latest version can't dump RTX 3080/3090 bios yet. or 100%. Started 9 minutes ago For this purpose I overclocked the gigabyte in performance mode by +100Mhz offset on the core and +650Mhz on the memory and this with simultaneous lowering of the power limit by 10%, which results in ~ 333 watts at the gaming OC. With these I'm getting 122 MH/s at 314 W using excavator. Make sure to use mining client that support 100% unlock. Its saved a bit of heat and Im performing slightly better FPS wise. Is it important over the 97.5%? rodilool Or that is how it used to be. I can only hit 2190 at 1.17v in game I see other chip can do 2225 at stock voltage. Powered by Invision Community. So the card runs constantly in every scenario with 1785Mhz at a maximum of 285Watt (rare applications like division 2 can even slightly exceed this). So no matter what, it downclocks to meet the 70C. Could I keep the same clocks and undervolt? AMDs Radeon RX 7900 XT GPU in free fall? In order for a 3080 to match the performance of a 3090, the 3080 needs a greater power draw and temperature all things being equal. 3080/3090 Undervolt - Microsoft Flight Simulator Forums I don't know, it just feels good to have +99% For a better experience, please enable JavaScript in your browser before proceeding. 110 MH/s and below 290W. I linked the full results in the original post if anyone is interested. I've heard people get slightly better scores with custom 12pin cables and no adapter, I'm receiving a custom cable soon will check whether it makes a difference. Posted in General Discussion, By Started 42 minutes ago The picture in the title achieved stats in row two below, just below the stock row. I have no clue how mining affects graphics cards. I saw many people to change rtx 3090s 4x but gained silicon lottery on same volts 30-45mhz yeah not good. In QHD and load scenarios that generate less load, were usually more like this at 250 watts on average. RTX 3080 Undervolt 0.85v @ 1920mhz Results | TechPowerUp Forums Undervolting the RTX 3080 and the RTX3090 - Bjorn3D.com Haven't tried and ray tracing yet this is pretty much what i did. But still, 1791 wasn't even stable on ~820mV. For PC cases with good cooling performance it's not that big deal, just question did you please checked actual mhz in games ? Press J to jump to the feed. I was happy with the TUF and didn't know it. then you have the most insane god-tier golden sample silicon chip I have ever seen. Yeah you gotta flatten the curve really early otherwise it does weird things. I started mining few days ago and i'm looking for ways to maximaze performance/safe/profit ratios. 2 Comments. It is stable. Undervolting Ampere, GeForce RTX 3080 Hidden Efficiency - Wccftech Posted in New Builds and Planning, By Just recently bumped into this thread and I totally agree that Optimum Tech's results seem to be good only for light rasterization workloads. The RTX 3090 is better if you need the extra VRAM for 4K gaming or other high-resolution applications. Link:Pure RayTracing benchmark by MARvizer (itch.io) I will test it later when I put hdd water block on backplate. Build is R7 5700x (stock settings) + 3070 aorus master + 16GB 3200mhz on a B450 msi carbon ac wifi. And will definitely see what I can achieve in terms of temps and power, dropping the curve further. But wauw. 2 Likes. Upvoted so we see a pattern. It's easy! I saw many people to change rtx 3090s 4x but gained silicon lottery on same volts 30-45mhz yeah notgood. So I kept 1755mhz 0.8v with 1050mhz x2 overclocked memory to 21.6ghz . This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register. My 3090 performs better than stock now. It seems that the power hungry design does make it run hotter. Well, my card is around 35c at idle too, so it's kinda close. But first a few words about the settings and the models: The card runs in the Performance BIOS with 370 Watt and delivery state. Editor-in-chief and name-giver of igor'sLAB as the content successor of Tom's Hardware Germany, whose license was returned in June 2019 in order to better meet the qualitative demands of web content and challenges of new media such as YouTube with its own channel. System sudden fails when I run game or open high resolution image. I dumped my Bios with nvflash Inno3D leaked the newest version, I ended up buying a 3090 Tuf in the end, I'm running it with -500Mhz downclock on the gpu, stock on the memory and still able to stream. The heaviest settings possible RTX 3090 Ti Mining Settings and Hashrate - Miners Blog Forums - Linus Tech Tips That's the part I don't quite understand the 'why' of. ZOTAC today launched its GeForce RTX 3090 Trinity Ampere graphics card. Any ideas to optimise this? MOBO: ASUS ROG STRIX Z490-G GAMING (Wi-Fi) | CPU: Intel Core i7-10700K @5GHz + Corsair H100x | GPU: ASUS ROG STRIX RTX 3080 Ti OC LC @2GHz | RAM: G.SKILL TridentZ RGB @3600MHz, CL16-16-16-36| SSD: Samsung EVO Plus 1TB,Samsung EVO Plus 1TB, Crucial MX500 2TB, Crucial MX300 1.05TB | PSU: Corsair HX1200i | CASE: HYTE Y60 (White/Black)|MONITOR:SamsungOdyssey G9 @5120x1440p, 240Hz, Samsung CRG9 @5120x1440p, 120Hz. I didn't think this was possible. Follow Igor: After 65c it feels going unstable. $1500, comes with invoice and packaging. Tried a few times with undervolting around . RTX 3080 / 3090 Undervolting - 100W Less = Same Performance? The bloody afterburner voltage adjustment was a bit of a pain, it has a mind if its own. You're damn lucky IMO. I love my 3080 TUF, and have been tweaking too, I have two profiles I go between. Articles, Guides, Reviews & Articles, Video Cards/Graphics Cards Any suggestions? ASUS RTX 3090 ROG Strix 24 GB OC GPU in great condition with two years warranty left. There are three GPU fans and two of them are grouped into one so you can see they are running at roughly 3500RPM. GeForce RTX 3080 20 GB and RTX 3070 16 GB as possible answer to AMD, 32 GB DDR4 Patriot Viper (SK Hynix) @ 3800MHz CL 18/19/21/34 1T, ASUS TUF Gaming RTX 3090, Gigabyte RTX 3090 Gaming OC, Sound card, 2x BD burner, 280 radiator for CPU, 5 case fans (4x 140mm 1x 80mm). are your temperatures lower and performance higher than before? The 243w is only pcie and two 8pin, gpuz and furmarkcan't read the third 8pin. I already searched in some mining communitys but seems like no one really is mining with this GPU . Looking for 3090 undervolters! - Page 2 - Linus Tech Tips RTX3090 have a few flaws. 3dmark keeps crashing that high, and had a restart at 1860 @850mV. You need to undervolt your GPU to minimize its power consumption and keep it under 80 Watts. It seems your FTW3 holds a higher clockspeed out of the box and with less power usage than my ROG STRIX Press question mark to learn the rest of the keyboard shortcuts, 5900x | 32GB CL14 3600 | 3080 Trio X WC'd | Custom Loop | x570. So my settings was 1815MHz @850mV, with 137% powerlimit. I don't know the exact dB though since I have no way of measuring it. williamcll Started 39 minutes ago In my case I settled on 1815 MHz. Also, it says "mem: 1218 MHz" - is the memory downclocked a lot? We already know that you can lower the power limit, so far, so boring. Since every card is different I will mainly show you how to do it on your own card. When Heavenfreezes or crashes, I bump up the voltage a tiny bit, until Heaven doesn't freeze or crash. hey guys, what are good Pure RT and superposition settings to test undervolts? The most advanced Linux crypto mining OS packed with everything you need to get started. When will have new version support Ampere GPU? I would like to further undervolt my RTX 3070 to test out the maximum efficiency. Thank you, message was successfully sent. The RTX 3090 Ti provides 66 Mh/s hashrate on RVN with a power consumption of 446 watts. I need help, i need to reintall my windows ever week, Intel(R) Ethernet controller I225-V not working. Honestly worst and best card are close to 300mhz difference overclock easily, rtx3090 has high silicon quality fluctuations. For a few generations of GPUs now the GPUs have no longer been running with a set clockspeed instead boosting to a higher clockspeed that is partly determined by power target limit and temperatures. YouTube Facebook Instagram Twitter, Copyright 2023. On the stock curve for my 3090FE the card sits at 1830/1860 and given enough time the fans hit 1600rpm which is over my starting to get annoying noise threshold. Vinicio Edit: So we save almost 40 watts! Thanks. Hello again! I rolled up the sleeves and got down to tweaking, it seems pretty stable at 1800MHz with 800mV. I have MSI 3090 SUPRIM X Settings: Undervolt at .825 PL: 67 Memory - 200 Fan: 80 % Hash rate 99 Mh/s Memory junction 102 - 104 degrees centigrade Any ideas to optimise this? Because if you have in afterburner 1800mhz on 0,875v you can be boosting in game to 1830mhz in RTX game like Metro exodus, which make a lot of difference to perspective of undervolt result just curios to be sure mine 1755mhz on 0,8v is actually clocks shown in games, but in MSI afterburner I think I hve 1725 or 1740 adjusted but it`s doing 1755 in all tests and games , soo yeah, True, sometimes my clockspeed hits 1815MHz for a short while, You need to be a member in order to leave a comment. Posted in General Discussion, By But in a game that maxes out the rtx cores like metro exodus I had to dial it all the way down to 1800mhz on 0.825v. If you loose to much performance, increase frequency and voltage a step and try again. Drag the dot to the frequency you want. It's very interesting indeed Hi GDDR6X in 3080 and 3090 Hits 110C While Mining Ethereum Do you get the same readings from fx HWiNFO? Current usage 300w- going down atleast 50 would be cool, since it also reduces temp? Due to the demand I have pressed the whole thing once again in tables, so that you have summarized everything clearly at a glance. As you can see in my screenshot, my card settled at 1875MHz @1.069V, with 460 Watt peaks: So I just tried running Heaven with everything on Auto with the power limit cranked to the max. For example in something old like heaven (what optimum tech tested with) I could do 1920mhz on 0.85v and be "stable" all day. Can a rtx 4070ti run whit 600W 80+bornze PSU. Currently my specs are: [122-123mhz] +1375 Mem, +0 core, 90% PL, Auto fan speed usually hovers 90%. My chip is just normal, I think most 3090 can do it. What about mem clock? There shouldnt be any risk for damage to your card but just be aware of any risk regardless how minor it is. It was an extra 150pounds aswell as the cards have all gone up. Started 40 minutes ago I know how to undervolt with MSI Afterburner blindly. Is there a simple answer to the question 7900XTX or 4080? Hello! I changed from the TUF OC to the STRIX OC. It was an extra 150pounds aswell as the cards having all gone up in price. My 3090 FE can do 1890MHz @850mV, I get 13400 in Port royal. Posted in New Builds and Planning, By ASUS TUF RTX 3090 Setting a fixed voltage and clock in the sweet spot You have already briefly seen the values of the TUF 3090. Posted in CPUs, Motherboards, and Memory, By Use minerstat and start mining with your Nvidia RTX 3090. 1800MHz at 800mV is a good undervolt IMO! You can see in this case, we achieve the 2040MHz goal at 1000mV, and don't need to go any further. MSI GeForce RTX 3090 Ti SUPRIM X: Overclocking (OC) - TweakTown Increased performance. A place for everything NVIDIA, come talk about news, drivers, rumors, GPUs, the industry, show-off your build and more. Happy for you!! Otherwise, the default setting will run the card in around 120 watts. sasume Just don't mention competitors in any way, shape or form and you'll be OK. JavaScript is disabled. Welcome to TechPowerUp Forums, Guest! Started 9 minutes ago Freq - 1812 ; Temp 65c ; 60fps, Afterburner: 1905MHz@850mV / Port Royal Score CRASH, Afterburner: 1965MHz@850mV / Port Royal Score CRASH, Afterburner: 1845MHz@850mV / PR Scr 13,042 / Avg. I changed from the TUF OC to the STRIX OC. Linus Media Group is not associated with these services. RTX 4090+ R9 5900X.BOTH COOLED WITH LIQUID METAL. Im getting like average 80Mh/s with different settings like 75-100% Power limit. A standard RTX 3090 Ti sports a thermal design power (TDP) of 450W, with some Nvidia board partners outfitting their custom RTX 3090 Ti models with a TDP exceeding 500W. The problem I am having is the fans are particularly loud - when the core is running at 83C which is the hard limit set on the card, the fans are running at 100% which equates to 4000RPM so it sounds like a jet engine. Share Your 3090 FE Undervolting Curve : r/nvidia - Reddit I use evc2 to lock vcore at 0.7v. You say that like I'm making my performance worse than stock. Well, there is. Started 19 minutes ago Interestingly you can see the temperatures of my two NVME drives, one of them which is sitting below the GPU is at 38C however the other which is right above the hot GPU backplate is sitting at 50C.? Thanks. And yes sure, Nvidia could absolutely have sent a binned card and they probably did. What I saw betterundervolt results had the guys from end 2020 and batches from March and later were cards with lower silicon quality in most cases, just luck I know. Sign up for a new account in our community. For a better experience, please enable JavaScript in your browser before proceeding. RTX 3090 FE | Aorus Master | 5950x | 32gb 3200 mhz. the. The RTX 3090 Ti hashrate is 135 MH/s on the Dagger Hashimoto-based miner. It only updates when there is an update, not immediately. The BFGPUs The GeForce RTX 3090 Ti and 3090 are powered by AmpereNVIDIA's 2nd gen RTX architecture. Just FYI, I could run 1845 at 850 all day long until I got a new system with a 7950X. Damn thing still whines like a jet engine though. You can also run the Port Royal or Timespy Extreme stress test in 3DMark. RTX 2060 Overclock Settings | Crypto Mining - GamersWiz Maybe I should try to tomorrow and see how far my card will go on auto, with the powerlimit set to max - kinda curious what the temps will be, and were the clockspeed will settle. Ideally the power scales with the square of the voltage. | Eine Publikation von igor'sLAB. Geforce Now and the Apple Mac Book Pro (M1 Pro) a match made in heaven? You're welcome Rtx 3000 series undervolt discussion - [H]ard|Forum I am getting my 3090 Strix (November 2020 batch) and I can post my undervolt for comparison. Problems with the performance of a RTX 3090 XC3 Ultra My system at the time of benchmark: 8700K @4.3GHz, 32GB 3600MHz CL16 RAM, no Resizeable BAR (my motherboard does not support it). The software I used for this article was: I undervolted both the Gigabyte RTX 3080 Eagle OC and the Gigabyte RTX 3090 Eagle OC but in the images below it is the RTX 3080 that is used. 2nd hand market can be a crapshoot sometimes. I have the same settings on my 3090 FE and I'm positive it can't reach 14k in PR. Just curious what other undervolters are doing with their FEs, and maybe see if there's an opinion that I could personally do something better. I noticed the extra power connector on the strix version and decided to get that instead. I first run Bright Memory: Infinite Ray tracing for at least 30 minutes while logging the data via GPU-Z. Bonnouji Sorry that it seems like I want to try and find the "Whyit isn't true". Still though. Sounds a bit scary loading a BIOS onto my card made for another card entirely. Power consumption scale linearly with clock. What-ever you do, you need to re-test after each change which can take some time. The memory also gets +650Mhz as in the gigabyte, we leave some room for the maximum overclocking value to preserve the components. on 4k 60hz monitor with vsync on I get lower gpu utilization and temps go in heavy games up to 70 deg or 65deg. So I just settled in with 850mV and 1815MHz. Interesting that you say it doesnt affect performance by as little as 2-4 FPS. Posted in New Builds and Planning, By So yeah; Heaven until freeze or crash and thenTime Spy Stress Test. In some scenarios that generate very little load, the card remains below the 330 watt limit, especially in lower resolutions. Built with enhanced RT Cores and Tensor Cores, new streaming multiprocessors, and superfast GDDR6X memory, the ZOTAC GAMING GeForce RTX 3090 Trinity OC gives rise to the amplified gaming experience with ultra graphics fidelity. Even when you're undervolting. JavaScript is disabled. Apply the curve using the apply button on the main afterburner window. about. The average voltage was around 960 mV. After the initial disappointment, it seems that the FTW3, at this lower noise levels, is just as fine as the TUF, but it has better RAM cooling and more room to stretch its legs if I would care less about fan noise or ever put it under a water block. For a better experience, please enable JavaScript in your browser before proceeding. You must log in or register to reply here. Did you OC it? I am able to run this at 1920 MHz Clock, +250MHz Mem (Haven't tried to max this out yet), but at 430W power draw, and 70 C. When I run those same settings on Heaven, I hit 380W, 62 C. Will report back after I game a bit more and test with Time Spy Stress Test for framerate stability. Gigabyte Z390 AORUS Pro WiFi: Is Midrange AORUS Right For Your Next Build? Also, just for info: my 3090 was perfectly stable at 1800MHz@850mV but after started playing games with Ray Tracing like Metro Exodus Enhanced Edition and Control I learned that my 3090 wasn't stable at all. The eBay seller didn't modify the card or use it at all? My curve is set to1800mhz at 800mv. My old CPU was 4790K. My temps are usually around 65 to 70 on core, around 82 to 90 on memory depending on game. - Very theoretically extend the life of the card (less heat) My preferred settings on a 3080 Gigabyte Gaming OC - 875mV set to a upper curve of 1965Mhz (down from 2000Mhz ish in many games stock)

Charlotte Hornets Internships Summer 2021, What Happened To Kevin Rutherford, Murders In Champaign, Il 2019, My Boyfriend Started Smoking Cigarettes, What Are Infp Males Like?, Articles R